DIY Your Own The Light Maker Orgone Pyramid
Operation place: Please choose a clean and hygienic place to operate, to prevent the Orgone Pyramid from being polluted in the process of making the Pyramid. (PS: It is more conducive to energy accumulation in some natural environments, such as grasslands, forests, etc.)
DIY Material: Malachite, Turquoise, Pyramid Mold, Aluminum Wire, Sequins, Measuring Cup, Stirring Stick, Glue A and Glue B. (PS: The operator can automatically add or remove accessories according to personal wishes.)
Note: After the glue is prepared, it can only be used immediately. Please pay attention to the amount of glue each time you prepare it. It is recommended to prepare a small amount of glue several times.
Keep the mold open horizontally.(PS: The mold opening must be kept level to prevent glue. overflow)
Add the first layer of crystals, then adjust the colored aluminum wire to the desired length and shape and insert it into the crystal. (PS: the pyramid is made upside down, the bottom of the fixed mold is the top of the finished pyramid)
Pour A:B=3:1 into the measuring cup, Stir about a minute, and pour the glue into the mold.
Let it sit until the glue is completely set. (PS: Completely in about 24 hours at 25℃, adjust time according to local temperature, the lower the temperature, the longer it takes for the glue to set, the lower the temperature, the longer it takes for the glue to set.)
Place the second layer of crystals and sequins, and second glue mixing, prepare glue according to A:B=3:1. Then pour the glue into the mold.
Let it sit until the glue is completely set. (PS: Completely in about 24 hours at 25℃, adjust time according to local temperature, the lower the temperature, the longer it takes for the glue to set.)
After the second layer of glue is completely solidified, it is completed！！
*Safety Tips: The materials are not edible, please be careful to prevent children from eating them by mistake.